Do you have a question about the ST2265 and is the answer not in the manual?
Questions and answers
Summary of Contents for SynerTech ST2265
Page 1
1 Unit of 12VDC 23A battery for hand held remote control Extended a 30 cm length of US plug with earth Power Cord ST2265 for double US socket outlets with earth ST2326 for single US socket outlet with earth Total rating 13A for outlet(s)
Page 2
Operation Guide Hand Held Remote Control For battery replacement and installation on wall, back cover has to be removed. For the battery replacement, check the polarity of 12V 23A battery and insert into correct connection plate. There is key chain hole for user, if applicable. There are two button for control and LED for indication.
Page 3
Technical Data : Hand Held Remote Control Receiver Unit Battery : 12VDC 23A Voltage: AC110V~ Standby current : 1 mA Standby current : 1 mA For use in ambient temperature from -10ºC to 35ºC...
Page 4
FCC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the ST2265 and is the answer not in the manual?
Questions and answers