Description
Demonstration circuits 2254A-A and 2254A-B feature the
LTC2956-1 and LTC2956-2, respectively. The
is a micropower, wide input voltage range, configurable
wake-up timer with pushbutton control. It periodically
wakes up and turns on a connected system to perform
tasks like monitoring temperature or capturing images.
After completing the task, the LTC2956 turns the system
off to conserve power. The wake-up timer period can be
adjusted from 250ms to 39 days.
BoarD photo
+
PSU
–
DEMO MANUAL DC2254A
with Pushbutton Control
The DC2254A allows easy access to all the pins necessary
LTC
2956
to configure the device. Onboard jumpers, and an 8-pin
®
DIP switch provide a range of value options, to set the
wake-up timer, wake-up timer period and long power down
time. Turrets are also present, allowing direct access to all
the pins present on the LTC2956 to allow easy interfacing
with a system with arbitrary requirements.
Design files for this circuit board are available at
http://www.linear.com/demo/DC2254A
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
Figure 1. Test Equipment Setup
LTC2956
Wake-Up Timer
I/O TO
SCOPE OR
µP
dc2254af
1
Need help?
Do you have a question about the LTC2956 and is the answer not in the manual?
Questions and answers