Remote Controller; Changing The Battery - Telefunken TF-DVBT220 Instruction Manual

Operation

Remote controller

POWER: Power ON/Standby the receiver
MUTE: Mutes the sound
FORMAT: Quick change receiver's output resolution
ASPECT: Switch Aspect Ratio quickly
TV/RADIO: Switch between TV and Radio mode
MEDIA: Enter PVR Media
: Fast backward to view the current playing file or
channel
: Fast forward to view the current playing file or
channel
(PREV): Go to the previous recorded file, and play it
(NEXT): Go to the next recorded file, and play it
TIMESHIFT: Begin to timeshift
(PLAY/PAUSE): Pause when you play a recorded
program or skip when you are recording
■(STOP): Stop record, timeshift or stop play recorded file
6
REC: Begin to record the viewed program
RED (TTX): Function key ( TeleText switch)
GREEN (SUB): Function key (Subtitle switch)
YELLOW (ZOOM): Function key (Zoom)
BLUE (TIMER): Function key (Enter Schedule menu)
EPG: Show Electronic Program Guide (EPG)
INFO: Shows current channel's information
UP: Channel change, or move cursor up
DOWN: Channel change, or move cursor down
L EFT: Move focus left. (Also VOL-)
RIGHT: Move focus right. (Also VOL+)
OK: Confirm
MENU: Show main menu or back to full screen play program
status from main menu or sub-menu
EXIT: Exit from current open menu
FAV: Display the favorite channel list
IPTV: function not available in this model.
VOL +/-: Volume control.
PAGE +/-: Page UP/DOWN.
0-9: Enter the channel's number
RECALL: Switch back to previous channel
AUDIO: Switch among left audio/right audio/stereo
1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.