Included Components
•
(1) PA411 Antenna Combiner
•
(1) 1-to-4 Power Distribution Cable
•
(1) PS60 Power Supply
•
(1) Rack Mounting Kit
•
(1) BNC Bulkhead Adapter
•
(4) 22-inch BNC-BNC Coaxial Cables
Note: Antenna is not included. Please use the antenna that shipped with the PSM transmitters or other antenna from the appropriate frequency range.
Front and Rear Panels
① RF Output Antenna
Connector
② RF LED Indicators
③ Power LED
④ Power Switch
⑤ Power Input
Use the ¼ wave antenna supplied with the P3T transmitter, or any other Shure antennas that
cover 470-865 MHz
Green : RF signal present
Red: RF signal overload
Green : Power on
Green/red flashing: Power output overload
Requires a Shure PS60 power supply
Shure Incorporated
5/11