HP L1910i Quickspecs page 5

QuickSpecs
Technical Specifications
Ergonomics Ergonomics Ergonomics Ergonomics
Additional Information Additional Information Additional Information Additional Information
Material Usage Material Usage Material Usage Material Usage
DA - 13038 North America — Version 3 — December 12, 2008
HP L1910i 19-inch LCD Monitor with IWC Stand HP L1910i 19-inch LCD Monitor with IWC Stand HP L1910i 19-inch LCD Monitor with IWC Stand HP L1910i 19-inch LCD Monitor with IWC Stand
IT ECO declaration
TCO 03
CECP
EPEAT™ - Silver
The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat
panel displays.
This product is in compliance with the Restrictions of Hazardous Substances
(RoHS) Directive, 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive, 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the
Silver level, see: www.epeat.net.
Plastics parts weighing over 25 grams used in the product are marked per
ISO 11469 and ISO1043.
Display meets the requirement for low frequency electromagnetic fields per
TCO and prEN50279 A/B/C.
This product contains 0% recycled materials (by wt.)
This product is 99.0% recyclable when properly disposed of at end of life.
Packaging Materials
Corrugated Carton 0.800 kg
Bag LDPE 0.037 kg
Film PP 0.190 kg
This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the Environment
at:
www.hp.com/hpinfo/globalcitizenship/environment/
supplychain/gen_specifications.html
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel – finishes must not be used on the external surface designed to
be frequently handled or carried by the user.
Page 5