Sony WIH700/R Help Manual page 65

Help Guide
Wireless Stereo Headset
h.ear in 2 Wireless (WI-H700)
Listening to music from a device via BLUETOOTH connection
You can enjoy listening to music and basic remote control operation of a BLUETOOTH device via a BLUETOOTH
connection. The BLUETOOTH device is required to support the following BLUETOOTH profiles.
A2DP (Advanced Audio Distribution Profile):
enables you to enjoy high-quality audio content wirelessly.
AVRCP (Audio Video Remote Control Profile):
enables you to adjust volume, etc.
The operation may vary depending on the BLUETOOTH device. Refer to the operating instructions supplied with your
BLUETOOTH device.
Connect the headset to a BLUETOOTH device.
1
Wear the headset.
2
Put the headset with
dot.
A: Tactile dot
Play back music or video on the BLUETOOTH device.
3
Adjust the volume on the BLUETOOTH device.
Adjust the volume by pressing the +/- buttons of the headset.
4
When the volume reaches the maximum or minimum, an alarm sounds.
Hint
The headset supports SCMS-T content protection. You can enjoy music, etc., from a device such as a mobile phone or portable
TV that supports SCMS-T content protection.
Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the
BLUETOOTH device.
Volume during a call and volume during music playback can be adjusted independently. Changing the call volume does not
change the volume of music playback, and vice versa.
indication to the left and indication to the right. The
65
unit of the headset has a tactile