Admissible Air Inlet Temperature; Turbocharger Speed; Fig. 12: Layout And Overview Of The Speed Measurement System - ABB XAC25762 Operation Manual

Operation Manual / A200-L
5 Monitoring during operation / 5.2 Admissible air inlet temperature
5.2

Admissible air inlet temperature

The permitted air inlet temperature must be between -40C°... +45C°.
5.3

Turbocharger speed

5.3.1 Introduction
The speed of the turbocharger must be permanently monitored.
CAUTION
Do not use cables as a climbing aid
If you pull the speed measurement cables too hard, contacts can be pulled
out.
Do not tension the speed measurement cables.
u
5.3.2 Layout and overview
Fig. 12: Layout and overview of the speed measurement system
86505 Speed sensor
86506 O-ring
86515 Cable connector
86526 F/I converter
© Copyright 2021 ABB. All rights reserved.
86528 Tachometer
42047 Screw plug
32109 Sealing disc with cams
*) Alternative mounting position for speed
sensor
or for the second speed sensor
HZTL4036_EN Rev.T December 2021