S4A U-M002 Manual

Please read the manual carefully before using the Device
1.Features
> Metal shell, anti-vandal
> Very low power consumption,standby current less than 30mA
> WG 26 output
> Fast Search speed : time between reading card and opening the door is less than 0.1S
2.Specifications
Operating Voltage
Card type
Reading Distance
Quiescent Current
Operating Temperature
Operating Humidity
Waterproof
Dimension
3.Installation
> Drill the holes on the wall according to the hole size of the back cover or install the cable box
on the wall. And Fix the back cover firmly on the wall with the supplied screws. (Picture below)
> Thread the cable through the cable hole, connect the wire needed, wrap unused wire with
insulating tape in case of short circuit
> Fix the front cover to the back cover with screw driver
Proximity RFID Card Reader Manual
U-M002
9-12V DC
EM/Mifare
3-6 cm
≤30mA
-45℃～60℃
10%- 90% RH
Conforms to IP68
110*48*20 MM