Beko DIN35321 User Manual page 15

Preparation
Unpack the test
Open the tap and
strip.
let the water flow for
approx. 1 minute.
After detecting the water hardness:
1. After turning on your machine, press and hold the Delayed Start and Start/Pause/Cancel keys
respectively.
2. Using the Delayed Start key, turn on LEDs 9 and 3.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness English Water
Level Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
If the hardness level of the water that you use is above 90°dF (French standard for water
hardness) or if you are using well water, than it is recommended to use filter and water
purification devices.If the hardness level of the water that you use is below 7°dH, there is no
need to use salt in your dishwasher. In this case, the Salt Indicator light on the control panel of
your dishwasher will light continuously.
If the water hardness is set to level 1, the Salt Indicator will light continuously although it is not
necessary to use salt. If you use salt under this condition, salt will not be consumed and the lamp
will not illuminate.
Dishwasher / User's Manual
Dip in the test strip
into the water for 1
second.
German Water French* Water
Hardness °dH Hardness °dF
0-4 0-8
5-7 9-13
8-12 14-22
13-15 23-27
16-19 28-34
20-50 35-90
Take out the strip Wait for 1 minute.
from the water and
shake it.
Water Hardness Level Indicator
On the 1 level, the 1 programme LED turns on.
st st
On the 2 level, the 2 programme LED turns on.
nd nd
On the 3 level, the 3 programme LED turns on.
rd rd
On the 4 level, the 4 programme LED turns on.
th th
On the 5 level, the 1 , 2 , 3
th st nd
turn on.
Make the necessary
adjustment
according to the test
strip.
and 4 programme LEDs
rd th
13 / 43 EN