Table of Contents
Advertisement
Note
If the self-test fails, check the cable connection.
Internal & External Indicator
The internal and external indicators work at the same time. You can respectively set the
indicator to inform the status of each parking space.
3. Set the indicator parameters for different parking space status.
1) Optional: Select Indicator Source if you have selected Internal & External Indicator for
Indicator Control Mode.
2) Enable or disable the indication for different parking space status.
Unoccupied
The parking space is free.
Occupied
The parking space is occupied by a vehicle.
Note
If you select Internal Indicator or External Indicator, occupied status means all the
detected parking spaces are occupied, and unoccupied status means not all the detected
parking spaces are occupied. E.g., three parking spaces are detected. When the three
spaces are all occupied, the indicator will display the color you set for the occupied status.
When two spaces are occupied and one space is unoccupied, the indicator remains the
color you set for the unoccupied status.
Over Line
A vehicle occupied two parking spaces.
Special Parking Space
The parking space is specified to a certain vehicle.
3) Select Indicator Flicker and Indicator Color for different parking space status.
4. Optional: If there are symmetric parking spaces on both sides, and the distance between the
device to the monitored parking space lines is too far, you can enable alternate indicator control
and set the parameters.
1) Check Enable of Alternate Indicator Control Parameters.
2) Enter IP Address of the device on the opposite parking space.
The current device can control the indicator of the device on the opposite parking space, and
vice versa.
5. Click Save.
Note
For the detailed application of the different indicator control modes, refer to "Typical
Application" for details.
Parking Camera User Manual
12
Advertisement
Table of Contents
