Summary of Contents for GroundEFX Stryker Lite MX300
Page 1
DIGITAL METAL D E T E C T O R 602 Fountain Parkway Grand Prairie, TX 75050 User’s Manual Model # MX300 800.847.8269 “Ground EFX” and “Stryker Lite” are TM trademarks of WGI Innovations, LTD. “Sport Responsible” is a TM trademark of WGI Innovations, LTD.
TERMS TO KNOW The terms below are standard words found within this manual and the GROUND GRAB detector. All soils contain minerals. Signals from ground minerals interfere with the signals from metal objects. If metal is detected in this mode it will make DISCRIMINATION a sound.
CONTENTS LCD Display Arm cuff Battery with strap Compartment Headphone Jack Handle Stand Pinpoint Coil Bottom Rod Unit Trigger Top Rod Lock Bracket Wire Bracket...
ASSEMBLY Assembling the coil unit Connecting the Wiring Unscrew the bracket from the bottom rod. Take the Cable Pull and place it down the Rods. Fit the bottom rod inside the coil and re- place the bracket. Then tighten but do not Screw the end of the Cable Pull to the end of the wire.
Page 6
ASSEMBLY Batteries After the wire is locked in place, check To open the Battery Compartment the handle unit to ensure the latch is in door, unscrew the the two screws. Pull unlocked. Then place the rod all the way the door towards you and up to take the back into the handle unit and pull the door off.
LCD NAVIGATION DISPLAY CATEGORY VALUE 60-64 65-74 75-79 55-59 40-54 80-84 85-99 10-39 The Category Value accurately provides specific categories to help identify a buried object. Coins will most likely have a similar value with each pass with the coil due to their round shape. Gold and silver can actually be detected in various category values due to their metallic qualities.
HOW IT WORKS Ground Grab Settings - Press to enter “Ground Grab” Mode - Press “VOL” to change volume setting CUSTOM Mode Button’s GPS Button - Press while Volume is selected to Discrimination change Volume ALL METAL - Press to enter “Discrimination” Mode Mode Button - To save changes wait for 2-3 sec or press - Press...
Page 9
HOW IT WORKS GPS: SAVE - WAYPOINT - Press to enter “GPS” Mode which defaults to the Save/Waypoint List Notch Settings - Press to move Up and Down the Save/Waypoint List - Press to enter custom mode to detect the metal of your choosing SAVE: Press on Save...
DETECTOR MODES Ground Grab in the center of the “X. ” When the trigger is released the metal detector will return back to the previous mode. NOTE: Normally,the detector takes about 5 minutes to stabilize after it All soils contain minerals. Signals from ground minerals interfere with the signals from powers on, it is not recommended to do pinpointing during this period of time.
HOW TO DETECT When a metal is detected hold the trigger Power ON by pushing the “POWER” button. to activate Pinpoint function. Sweep the coil over the target in an “X” pattern. While in Pin- Point it will show you the depth of the metal Touch “SENS”...
To save a location press the “GPS” button. The arrow and yards will change the closer The option Save should be on the display, or further away you get to the location. push “ENTER”. Use the arrow keys to change or add letters to name the location.
TIPS WARNING If you find that the compass is not so ac- All metal detector’s may discover objects that can cause personal injury if curate, or sometimes direct the wrong struck. For example; power lines, explosives, gas lines, etc. When search- way, please rotate it 3-5 circles like this: ing for treasure, first observe these precautions: NOTE: Keep the LCD Display horizontal.
AUDIO FEATURES COURTESY • Fill holes • Obey NO TRESPASSING signs • Respect private and public property • Obey all laws • Do not cause any willful damage to property • Do not destroy property • Pick up after yourself, do not leave trash Headphone Jack Use for less disturbance to others around you...
TROUBLESHOOTING TONE RECOGNITION There are eight tones indicatng 8 different metals (iron, foil, nickel, P-Tab, S-Cap, Zinc, Dime and Quarter)that will help you to identify the material SOLUTION PROBLEM the detector has found Check to ensure that you are using Won’t turn ON, new batteries.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two may also visit our website and register your product at www.groundefx.com (you are still required to mail WGI criteria: (1) This device may not cause harmful interference, and (2) This device must accept any Innovations your proof of purchase before the warranty is placed in effect.) Follow the onscreen directions to...
Need help?
Do you have a question about the Stryker Lite MX300 and is the answer not in the manual?
Questions and answers