Connecting Multiple Monitors - LG 86BH5F Owner's Manual

24

Connecting Multiple Monitors

To use multiple products, first connect an external device to the product, connect one end of the supported signal input
cable to the connector of the product, and then connect the other end to the
wish to connect to.
* DP Cable: Use a DP cable that is certified to a DP 1.1a (SST) standard or higher.
NOTE
• In general, up to 100 monitors can be connected via the DP OUT port (at the recommended resolution) if the signal is
stable and there is no cable loss. To connect more than 100 monitors, it is recommended to use a distributor.
• When the tile mode is configured via HDMI3 / DVI-D / OPS cables, HDCP-encrypted content cannot be displayed.
• If the signal cable connecting the product to your PC is too long, make sure to use a booster or optical cable.
DP IN DP OUT DP IN
HDMI IN
DP OUT DP IN
DVI IN DP OUT DP IN
LAN IN LAN IN
LAN OUT
RS-232C RS-232C RS-232C
IN OUT IN
connector of the product you
DP OUT DP IN DP OUT
DP OUT DP IN DP OUT
DP OUT DP IN DP OUT
LAN IN
LAN OUT LAN OUT
RS-232C RS-232C RS-232C
OUT IN OUT