Siemens WT45HVG3 User Manual And Installation Instructions page 29

Table of Contents

Advertisement

¡ If you do not clean the appliance
as described, the appliance's func-
tionality may be impaired.
Requirement: The display shows the
following during operation:
Clean the fluff filter → Page 27.
1.
Open the base unit → Page 33.
2.
Carefully remove the filter mat from
3.
the retainers.
Ensure that you do not deform or
damage the filter mat.
Use a soft brush to clean the heat
4.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Clean the filter mat thoroughly un-
5.
der warm, running water and
squeeze it out by hand.
.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning products.
Push the filter mat onto the retain-
6.
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note: You can order the filter mat
→ Page 24 as a spare part from
customer service.
Close the base unit → Page 35.
7.
operation en
29

Advertisement

Table of Contents
loading

Table of Contents