Download Print this page

Adexa PHP-2000DI Instruction Manual

Quartz patio heater

Advertisement

Quick Links

QUARTZ PATIO HEATER
PHP-2000DI
Instruction Manual
Thank you for purchasing this infrared heater. We hope you will be
completely satisfied with this product. To ensure this, please read these
instructions carefully before use and keep them in a safe place.

Advertisement

loading

Summary of Contents for Adexa PHP-2000DI

  • Page 1 QUARTZ PATIO HEATER PHP-2000DI Instruction Manual Thank you for purchasing this infrared heater. We hope you will be completely satisfied with this product. To ensure this, please read these instructions carefully before use and keep them in a safe place.
  • Page 2 Part Description Heating Element Assembly Knob Body Position Indication Plate Pull Switch Tube Cover Upper Post Assembly 3 -M5 X 6 Screw Middle Post 3-M5 X 6 Screw Lower Post Assembly Clamp Power Cord Base Cover 4-M6 X 30 Screw Base Assembly 1-WARNINGS ■...
  • Page 3 ■ Do not use this heater in the immediate surrounding of a bath, a shower or a swimming pool. ■ This movable appliance is designed for use in gardens, and can be used indoor and outdoor. The warranty will not apply to appliances used for professional usage.
  • Page 4: How To Assemble

    4-HOW TO ASSEMBLE ■ Before installing your appliance, you must disconnect the electrical supply at the circuit breaker. 1>to fix the chassis to the ground , take off eight piec es of M6*30, make base and base asembely sperate, take 3- Expansion screws to fix in the ground.
  • Page 5 3> Join the Lower Post Assembly (11) and the Middle Post (9) together with 3-M5X6 screw (as below picture) 4>Join the Upper Post Assembly (7) and the Middle Post (9) together with 3-M5X6.screw (as below picture) 5>Join the Heating Element Assembly (1) and the Upper Post Assembly (7) together ,then fix them tightly by rotating the Knob, and put the power...
  • Page 6: Operation

    6>. According to the request of use angle, Heating Element Assembly can adjust Angle at 0º~45º.(as below picture) 5-OPERATION The appliance is switched on by means of the pull switch (5). The slight vibration noticeable when the appliance is switched on will stop after a few seconds.
  • Page 7: Maintenance

    7-MAINTENANCE Your appliance dose not requires any particular maintenance. However, in the event of a malfunction, please consult an Approved Service Center. 1, This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities.or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.