Restoring Default Settings In The Setup Utility - HP Pavilion DV1000t Hardware And Software Manual

Restoring Default Settings in the Setup
Utility
The following procedure explains how to restore the Setup Utility
default settings. If the computer is not in the Setup Utility, begin
at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press
to enter setup," is displayed in the lower-left corner of the
screen.
2. Select Exit > Load Setup Defaults, and then press
3. When the Setup Confirmation is displayed, press
your preferences.
4. To set your preferences and exit the Setup Utility, press
and then follow the instructions on the screen.
The Setup Utility default settings are set when you exit the Setup
Utility and go into effect when the computer restarts.
✎
Your password, security, and language settings are not changed
when you restore the factory default settings.
Hardware and Software Guide
Software Updates and Recovery and System Software
f10
while the prompt, "Press <F10>
.
f10
to save
enter
,
f10
8–17