Tasty Trotter KYQ-1016G Assembly Instructions Manual

Tasty Trotter KYQ-1016G Assembly Instructions Manual

Mini spit roast oven

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS MINI SPIT ROAST OVEN
Model: KYQ-1016G
0359/16
FOR OUTDOOR USE ONLY
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY
RETAIN THIS MANUAL FOR FUTURE REFERENCE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KYQ-1016G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tasty Trotter KYQ-1016G

  • Page 1 ASSEMBLY INSTRUCTIONS MINI SPIT ROAST OVEN Model: KYQ-1016G 0359/16 FOR OUTDOOR USE ONLY PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY RETAIN THIS MANUAL FOR FUTURE REFERENCE...
  • Page 2 Please read all instructions thoroughly before proceeding. Find a large, clean area in which to assemble your Tasty Trotter oven. Please refer to the parts list and assembly diagram as necessary. Assembly of this oven involves many large components; it is advisable to have two people to assemble the unit.
  • Page 3 Exploded view: KYQ-1016G...
  • Page 4 Motor heat shield panel Motor Caster bracket assembly-left 11 Drip tray brace-left Hood handle assembly 13 Drip tray brace-right 14 Caster bracket assembly-right 15 Motor support 16 Cart connector pipe assembly Description KYQ-1016G M4×10 Screw M6×15 Screw Hard Wares List: KYQ-1016G...
  • Page 5 ASSEMBLY INSTRUCTIONS WARNING: Whilst every effort has made in manufacture of your roaster to remove any sharp edge, you should handle all components with care to avoid accidental injury. Tools required: Standard a Philips crosshead screwdriver and a adjustable spanner ASSEMBLY: Please read all instructions thoroughly before proceeding.
  • Page 6 Remove those four M6x35 screws and four M6 nuts of both sides Ref # 10 Attach with the removed screws and nuts. Ref # 14 M6×35×8 PCS M6 Nut×8 PCS...
  • Page 7 Remove those two M6x40 screws and two M6 nuts of both sides Attach with the removed screws and nuts. Ref # 16 M6×40×4 PCS M6 Nut×4 PCS...
  • Page 8 Ref # 12 Ref # B M6×15×2 PCS Ref # 8,9,15 Loosen the screws then locate the motor assembly and re-tighten..
  • Page 9 Ref # 6 Put the fork lock piece between the spit rod and the fixed bolt, and tighten the fixed bolt. Ref # 1 Ref # 2,4,5 Ref # 3 Ref # 2,4,5...
  • Page 10 Ref # 6 Unscrew the igniter cap and insert a AA battery with the “ + “ end upwards.
  • Page 11 Technical Information: APPLIANCE TASTY TROTTER / GUANGDONG KANGYE ELECTRIC MANUFACTURED BY: APPLIANCE CO., LTD. APPLIANCE CODE: KYQ-1016G TOTAL HEAT INPUT: 9.00kW(643g/h) The grill burners are rated at 4.5kW per burner. (ALL GAS CATEGORIES) GAS CATEGORY: 3+(28-30/37) 3B/P(30) TYPES OF GAS:...
  • Page 12 DO NOT SMOKE near cylinders. This Tasty Trotter oven is designed for use outdoors, in a well-ventilated area, away from any flammable materials. It is important that there are no overhead obstructions and that there is a minimum distance of 1m from the side or rear of the appliance.
  • Page 13: To Check For Leaks

    Clean burner holes with a heavy-duty pipe cleaner/wire brush. Fit the hose to the appliance using a spanner to tighten it onto the connection thread. If the hose is replaced it must be secured to the appliance and regulator connections with hose clips. Disconnect the regulator from the cylinder (according to the directions supplied with the regulator) when the oven is not in use.
  • Page 14: Outside Surface

    WARNING: Accessible parts may be very hot. Keep young children away from the hot appliance at all times (even while cooling down!). It is recommended that protective gloves (e.g. oven gloves) be used when handling particularly hot components. CLEANING AND CARE CAUTION: All cleaning and maintenance should be carried out when the oven is cool and with the fuel supply turned OFF at the gas cylinder.
  • Page 15: Troubleshooting

    SERVICING Your gas barbecue should be serviced annually by a competent registered person and an annual gas safety certificate should be issued starting one year from date of purchase. TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Burners will not light using 1.
  • Page 16 Always ensure the fat and juices can freely drip out of the hole in the bottom of the oven which will reduce excessive smoke and the risk of the fats igniting. For a more in depth cooking guide please refer to the Tasty Trotter website www.tastytrotter.com THERMOCOUPLE...
  • Page 17 CARE AND PROTECTION OF STAINLESS STEEL SURFACES 1. Wipe over the outside stainless steel surface with a light water repellent oil, wipe the inside with a vegetable oil or similar edible oil. 2. If stored outside, fit a rainproof cover over the oven when it is not in use. If you require any further information on this product or wish to buy spares or accessories then please contact us using the links on our website at www.tastytrotter.com...
  • Page 18: Tips And Suggestions

    TIPS and SUGGESTIONS Juices – we recommend using a jug with the oven to keep the juices that are often discharged during the cooking process which can be used to make your gravy. The fat can be used to cook your spuds in or saved for later use.
  • Page 19 Tasty Trotter Ltd. UK Bridge Street Clay Cross Derbyshire S45 9NU Tel: +44(0)1246 866800 Email: info@tastytrotter.com Website: www.tastytrotter.com...

Table of Contents