Summary of Contents for Scratch Live PIONEER MEP-7000
- Page 1 3RD PARTY CONTROLLER QUICKSTART GUIDE • PIONEER MEP-7000 & SEP-C1 • • PIONEER CDJ-400 • • NUMARK DMC2 • NUMARK ICDX • • DENON DN-HC4500 • DENON DN-HD2500 • SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.0...
-
Page 2: Installation
3. Select “Cancel”. SETUP 1. Start Scratch LIVE and switch both decks to internal mode. 2. You will now be able to control Scratch LIVE with your MEP-7000 or SEP-C1. BASIC OPERATION To select and load tracks use the KNOB (23) to scroll through your crates and tracks. - Page 3 Adjusts pitch slider. Load Loads selected track to deck. Jumps cursor to crate library. Knob Scrolls through selected library. Pressing knob jumps cursor between crate and track libraries. Jumps cursor to track library. SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.0...
- Page 4 To use a pair of CDJ400s with Scratch LIVE, you Below is the information displayed on the LCD screen of the Pioneer CDJ-400 when will need at least 3 available USB ports. PIONEER CDJ-400 used with Scratch LIVE. If you don’t have 3 ports available you may be able to connect your CDJ400s to a powered Artist name / Song name / Album name.
- Page 5 Switches tempo range between +/- 6,10 and 16%. Master Tempo Toggles Keylock. Tempo Slider Adjusts pitch slider. Works as cdj style cue button for setting and jumping to temporary cues. Play/Pause Toggles playback on/off. SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.0...
- Page 6 “PC no Link”. SETUP Start Scratch LIVE and switch both decks to internal mode. The DMC 2 should automatically be in PC mode. A flashing message on both screens will say: “PC no Link”. You will now be...
- Page 7 Loop Out Button Sets current loop out point. Back Beat Button Mapped to loop button in Scratch LIVE, toggles current loop on/off. Hot 1 Button If Sync is off, jumps to cue point 1. If Sync is on, sets cue point 1.
-
Page 8: Installation And Setup
3. Use the parameter knob to select USB-HID mode. 4. Select left deck or right deck. 5. Put Scratch LIVE into INT mode. 6. You will now be able to control Scratch LIVE with your iCDX! SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.0... - Page 9 Adjusts playback pitch. Pitch Bend Pitch Bend. PItch Keylock enable/disable. Eject Eject. Brake Time Set brake time (on ICDX, not inside Scratch LIVE). Bleep/Rev Censor/Play reverse. Scratch Enable platter control. Parameter Knob Select ICDX mode. Time Toggle time display mode.
-
Page 10: Basic Operation
SOURCE button, and use the PARAMETERS knob to scroll through the options. *make sure you set it to MIDI and not PC. 3. You will now be able to control Scratch LIVE with your DENON DN-HD2500. SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART... - Page 11 Up a level of your browsing. Fast search « » RW / FF. Cont/single Toggles auto mode. Dump Censor. Reverse Reverse. A1 - A2 Sets the Loop In point. Sets the Loop Out point. SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.0...
- Page 12 2. Turn on the Denon DN-HC4500. It will automatically be in PC link mode. 3. You will now be able to control Scratch LIVE with your DENON DN-HC4500. BASIC OPERATION To select and load tracks, use the PARAMETERS knob to scroll through your library and crates.
- Page 13 Fast search « » RW / FF. Cont/single Toggles auto mode. Title Scrolls the song title if display can’t fit name. A1 - A2 Sets the Loop In point. Sets the Loop Out point. SERATO SCRATCH LIVE 3RD PARTY CONTROLLER QUICKSTART 1.9.0...
Need help?
Do you have a question about the PIONEER MEP-7000 and is the answer not in the manual?
Questions and answers