5. After the driver is successfully installed, run the Setup program on the CD-ROM
included with the MPEG-2 PC Card and follow the installation instructions. This
installs the DVD Player software onto your hard disk.
For complete instructions on the driver and player installation process, refer to the
installation instructions included with the MPEG-2 PC Card.
To play a DVD movie
After you have installed the MPEG-2 PC Card and DVD Player software included with
your DVD module, you can play a DVD movie.
1. Insert the DVD Module and MPEG-2 PC Card into your OmniBook.
If you do not have hot-swap drivers installed in your OmniBook, it may be necessary
to shut down Windows prior to inserting the DVD plug-in module.
2. Insert the DVD disk into the module.
3. Click Start, Programs to run the DVD Player software.
Using OmniBook Plug-In Modules
1-17