Advertisement
Quick Links
Advertisement
Related Manuals for H3 System H3G-650
Summary of Contents for H3 System H3G-650
- Page 1 CDMA Gateway Instruction (H3G-650) H3 System Co., Ltd...
- Page 2 < Revision Notes > Date Version Content Author...
- Page 3 Overview This document describes instructions regarding the H3 CDMA gateway (H3G-650, H3 System) and the related components. This document includes How to install and configure the H3 CDMA gateway How to use the H3 CDMA gateway How to setup a server system for the H3 CDMA gateways...
- Page 4 3) Steps A. Turn off the gateway. B. Connect a serial cable (provided by H3 System) to a gateway and a PC. C. Run the configuration software. D. Select the suitable COM port (You can check the COM port at the device manager.) and click “Open.”...
- Page 5 F. Turn on the gateway. G. The current configuration and paired devices info are shown. H. Change the parameters and click “Send.” If you want to delete the pairing info, check “Delete List” and click “Send.” Before clicking “Send”, please double check the settings. K.
- Page 6 devices Red On Green On Green On Green On Green On Red On Red On Red On Green On During pairing process, the “Readings” LED turns GREEN. vii. At successful pairing, the “Readings” LED blinks GREEN 5 times. viii. At failure, the “Readings” LED blinks RED 5 times. The gateway goes to the step “v.”...
- Page 7 D. Pairing IEM’s blood pressure monitor Turn off all mobile devices nearby, especially Bluetooth. Set the mode selection switch at “P2.” iii. Let the IEM’s blood pressure monitor at pairing mode. Count 30 seconds. Turn on the gateway. The gateway shows the number of currently paired devices with LEDs for 5 seconds.
- Page 8 P2 Mode(Master): The same mode as “P2” mode with the mode selection switch Go to configuration mode. Please see the section “2. Gateway configuration” with “setting” checked. Click “Start” for searching devices. As the result, a list of Bluetooth devices available is shown in “Device List.” Select one device and click “Pairing.”...
- Page 9 LOG_PATH=C:\gprs\log <= Log file path DATA_PATH=C:\gprs\data <= Data XML file path iii. PORT=65001 <= TCP/IP port D. Change of configuration Stop the corresponding windows service Change the configuration file, gprs_config.ini iii. Re-start the windows service E. To start the windows service: At “Windows Service”, select “DataCollection_GPRS” and run.
- Page 10 battery="2.63" con_gwtime="20111221132941" con_devtime="20111221132941" /> </Device> <Device type="Weight"> <Data id="2222222201" measuretime="20110901142303" result="068.60" unit="kg" battery="2.3" con_gwtime="20111221132941" con_devtime="20111221132941" /> </Device> <Device type="Glucose"> <Data id="ZHZ3064BY" measuretime="20111109142303" result="463" unit="0" model="1" adapter="1" con_gwtime="20111221132941" con_devtime="" /> </Device> <Device type="Glucose"> <Data id="ZHZ3064BY" measuretime="20111109142303" result="463" unit="0" model="1" adapter="2" battery="3.0" con_gwtime="20111221132941" con_devtime="" />...
- Page 11 - Pressure_IEM : Blood pressure(IEM) - Weight : weight scale(AND) - Thermometer : Thermometer - OXI : Pulse Oximeter id="ZHZ306CBY" Device Serial No measuretime="20100101001250" Measurement time con_gwtime="20111221132941" Gateway's time stamp during communication between the measuring device and gateway con_devtime="20111221132941" Measuring device's time stamp during communication between the measuring device and gateway (If the measuring device supports sending...
-
Page 12: Usa-Federal Communications Commission (Fcc)
Regulatory Statements to be included in the Users Guide for Sputnik USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.