Advertisement
3. Safety Guidelines
Please read all the safety warnings and all instructions carefully before use. Failure to follow all the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in
the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
Work area
•
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
•
Power tool plugs must match the ratings on the outlet. Never modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
•
Avoid body contract with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
•
If operating a power tool on a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
Personal safety
•
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while
you are tried or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury.
•
Use safety equipment. Always wear eye protection. Safety equipment such
as dust mask, non-skid safety shoes, hand hat, or hearing protection used
whenever conditions require will reduce personal injuries.
•
Avoid accidental starting. Ensure the switch is in the off position before
plugging in.
•
Carrying power tools with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
•
Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
•
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
situations.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
•
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly
used. Use of these devices can reduce dust related hazards.
www.jeffersontools.com
USER MANUAL
JEFHTGVAR-230
2000W HEAT GUN
YELLOW & GREEN
EARTH WIRE
BLUE
NEUTRAL
WIRE
FUSE RATING
13 AMP
BROWN
LIVE
WIRE
CABLE
RESTRAINT
5
Advertisement
