Table of Contents
Advertisement
TROUBLESHOOTING
TROUBLES
No sound
and image
No image
No sound
Black screen
Blurring and
unstable image
Color cast
No power
No image after
loading the disc
Instable sound
caused by
vibration
Instable sound
even with no
vibration
CLEANING
• Do not leave this product submerged in water
• When cleaning the device, use a clean dry cloth to wipe the device clean.
(Do not use solvents).
• Clean only with a clean and dry cloth.
Power is disconnected;
the machine is not turned ON
signal wire is disconnected
Volume too low or the volume setup is not workable
Incorrect setup of image luminance and contrast;
Undervoltage
Disc is scratched
function menu setup is incorrect; weak signal
Voltage is not accurate: check interconnect circuit;
Fuse is disconnected: change fuse speci cation
Only audio frequency for the disc;disa is scratched;
disc for format is not supported
DVD is dirty or seriously damaged
Disc is dirty or scratched clean or replace the disc
9
SOLUTIONS
www.PyleUSA.com
Advertisement
Table of Contents
