1x2 hdmi splitter over single cat5e/6 cable up to 50m with ir (7 pages)
Summary of Contents for foxunhd FX-SP07S
Page 1
Operating Instructions FX-SP07S HDMI Splitter HDMI 2.0 1x8 HDMI Splitter, HDCP2.2 Supports 3D, 4Kx2K@60Hz(YUV 4:4:4), 18G, HDR, EDID Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Page 2
Our company reserve the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. INTRODUCTION FX-SP07S is a HDMI Splitter that distribute 1 Ultra HD source to 8 Ultra HD displays,with 2 Bit DIP switch to select from 4 kinds of EDID models. SPECIFICATIONS Operating Temperature Range -5 to +40℃(+23 to +104℉)
Page 3
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with the dealers. PANEL DESCRIPTION Indicator of HDMI output Firmware port Switch to “Mixed EDID” mode Switch to “Auto EDID” mode Switch to “Copy EDID” mode Indicator of Power input Power on/off: press the up/down to open/close the device www.foxunhd.com...
Page 4
Support HDR under copy EDID and Mixed EDID mode! CONNECT AND OPERATE 1) Connect the HDMI input source to input port of HDMI Splitter 2) Connect the HDMI Splitter output ports to the displays 3) Connect DC 5V1A power to the power port of the FX-SP07S. www.foxunhd.com...
Page 5
Unauthorized substitutes may result in fire, electric shock, or other hazards. 4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. www.foxunhd.com...
Page 6
The items listed are not exclusive, but are for illustration only. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. www.foxunhd.com...
Need help?
Do you have a question about the FX-SP07S and is the answer not in the manual?
Questions and answers