NOMA CTI1517110 Instruction Manual

5' INDOOR ARCTIC SPRUCE POTTED TREE
model no. CTI1517110
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
Thank you for purchasing this lighted tree. This tree assembles in minutes and is decorated with
energy-saving LED light sets.
This tree is pre-strung with 200 lights.
CARTON INCLUDES:
• 2 pre-lighted tree sections (A - Top Section, B - Bottom Section)
• 1 sturdy pot
• 1 power cord with adaptor
CAUTION!
ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR DISASSEMBLING.
Please locate the plug and socket first before assembled each sections of the tree.
ASSEMBLY:
Note: Before you start to assemble your tree, please choose a location near an electrical wall outlet. Place
the tree base on a level surface.
Please remove protective covers from the base of the pole from each section.
1. Carefully insert bottom section (B) of tree into tree base (see Fig. 1).
2. Insert the top section (A) of the tree into the bottom section (B) (see Fig. 2).
3. Insert the plug from the base of section (A) into the connected from the top of section (B). From section (B)'s
base connect to the power cord, then clip the connectors tightly as shown in the magnified drawing in Fig. 3.
4. Allow the branches to fall into place or gently pull branches up and out. When adjusting branches be
sure that all wires are free of branch hinges (See Fig. 4).
5. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and
one along the centre of the main stem. Repeat pattern for each branch (see Fig. 5).
6. Plug cord into electric outlet.
|
www.noma.com
INSTRUCTION MANUAL
A
Fig. 2
B
Fig. 1
Tree base
Retain carton for storage purposes
Fig. 3
Fig. 4
side side
view view
C
Fig. 5
Fig. 6
Instruction Manual
For indoor use only