Panasonic VIERA TX-P46S10B Operating Instructions Manual page 56

Link Functions
■
Features available
Reduce unnecessary power consumption in standby
Set Standby Power Save "On" in the Setup Menu to use this function
"Standby Power Save" (p. 32)
The power consumption in Standby mode of the connected equipment is controlled higher or lower in
synchronization with the TV On / Off state to reduce the consumption.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power
consumption in Standby mode of the connected equipment is automatically minimized.
When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is
increased to make startup time early.
●
This function is effective if the connected equipment can change the power consumption in Standby mode
and is set to higher consumption.
Auto standby for unnecessary equipment
Set Intelligent Auto Standby "On (With reminder)" or "On (No reminder)" in the Setup Menu to
use this function
"Intelligent Auto Standby" (p. 32)
When the TV is On, non-watched or non-used connected equipment goes into Standby mode automatically
to reduce the power consumption. For example, when the input mode is switched from HDMI, when Speaker
Selection is changed to "TV" (except for watching a disc).
●
If you select "On (With reminder)", the on screen message will be displayed to be noticed before working this
function.
●
This function may not work properly depending on the connected equipment. If required, set to "Off".
■
Features available
Direct TV Recording -
Recording the current programme in DIGA Recorder immediately.
●
If you connect a variety of recorders including other manufacturers' recorders at the same time, please
connect DIGA Recorder to the TV's lower HDMI terminal number. For example, if you use HDMI1 and HDMI2
for two recorders, in this case connect DIGA Recorder to HDMI1.
●
If you cannot operate, check the settings and the equipment
"Summary of Q-Link and VIERA Link features" (p. 52 and p. 53), "Preparations" (p. 55)
●
Changing channel or turning off the TV is available while the recorder is recording from its own tuner.
●
Changing channel is not available while the recorder is recording from the TV tuner.
INPUT
TV
ASPECT MENU N DIRECT TV REC
OPTION
TEXT STTL INDEX HOLD
56
(Using VIERA Link Menu)
What you see is What you record
Display "VIERA Link Menu"
1
AV
Select "Direct TV Rec" and start recording
2
EXIT
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control Speaker Selection
Speaker Selection
●
You can also start recording directly
RETURN
■
To stop recording
Select "Stop" in "Direct TV Rec" and access
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control Speaker Selection
Speaker Selection
●
You can also stop recording directly.
(
Q-Link
VIERA Link
Intelligent Auto Standby
Direct TV Rec
Start
Recorder Home Cinema
Home Cinema
Stop
Recorder Home Cinema
Home Cinema
Unlock the tuner
Tuner Locked
Please stop recording to operate
Unlock
Continue
)
Standby Power Save
start
select
DIRECT TV REC
select
stop
EXIT