Hitachi L26HR1U Instructions For Use Manual page 27

Band
Band can be selected either C or S by press
button.
Channel
Channel can be changed by
Buttons.
Colour System
b
By pressing /
a
_ `
Press / button to change the colour system to
PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not available for
the Colour System.
Note: In AV mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
Sound System
b
By pressing /
a
_ `
Press / button to change the sound system to BG,
I, L, L’, DK.
Fine Tune
b
By pressing / button, select Fine Tune. Press
a
`
/ button to adjust the tuning.
Search
b
By pressing / button, select Search. Press
a
`
button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
Store
b
By pressing / button, select Store. Press
a
OK button to store the adjustments. “Stored...” will
be displayed on the screen.
Install menu in AV modes
The following screen appears in the install menu:
_ `
/ button or Digit
button, select Colour System.
button, select Sound System.
Colour System
By pressing
_ `
a
/
_ `
ing / button, you can change the colour system to
PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or
AUTO.
VCR
By pressing
button, you can set the VCR to ON or OFF.
Store
By pressing
a
OK button to store the adjustments. “Stored...” will
be displayed on the screen.
Source menu
By pressing
menu appears on the screen.
6285&(
_
_
/
`
or
In source menu, highlight a source by pressing
b
button and switch to that mode by pressing
OK button. Source options are; TV, DTT, AV-1, AV-2,
AV-2 S, AV-3 (*), FAV, S-Video, YPbPr, HDMI-1,
HDMI-2 and PC.
* Note: AV-3 is only functional for the models with 3
SCART sockets.
- 26 -
b
/ select Colour System. By press-
b
/ select VCR. By pressing
a
b
/ button, select Store. Press
/ button, select the fifth icon. Source
_ `
/
`
or
/
a
`
or