Motorola T56QC4 Manual page 55

Connect & transfer
Connect & transfer
Quick start: Connect & transfer
Bluetooth® wireless
Wi-Fi Networks
USB cables
Share your data connection
Data use
Your cloud
Phone & tablet
Virtual Private Networks (VPN)
Mobile network
Airplane mode
Menu More
Back Next
Wi-Fi Networks
Turn Wi-Fi power on/off
Find it: Apps > , then touch the
Settings
turn it on
Connect to networks
To find networks in your range:
1 Touch Apps > Settings > Wi-Fi
Tip: To show your phone's MAC address and Wi-Fi settings,
touch Menu > .
Advanced
2 Make sure the Wi-Fi switch is turned on. 24 NOV 2014
3 Touch a found network to connect it (if necessary,
enter , , and
Network SSID Security
touch Connect ).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , swipe the status bar down, touch the network,
and enter the network's password.
Tip: When Wi-Fi is on, your phone automatically reconnects to
available networks it has used before.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable,
convenient internet access to other Wi-Fi enabled devices.
Note: Keep it secure. To protect your phone and hotspot from
unauthorized access, it is strongly recommended that you set
up hotspot security (WPA2 is the most secure), including
password.
Find it: Apps
switch to
Wi-Fi
hotspot
1 Your phone turns off Wi-Fi and uses the mobile network for
internet access. Touch
security:
• Network SSID: Enter a unique name for your hotspot.
.
• Security: Select the type of security you want:
•
, and
Wireless password
• Password: Create a password with at least eight
2 Touch
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices
can connect by entering your hotspot's
Security
Wi-Fi modes
For those who like to get a bit more technical, your phone
supports the following Wi-Fi modes: 802.11a, b, g, n.
> > >
Settings More Tethering & portable
and check Portable Wi-Fi hotspot
Set up Wi-Fi hotspot
WPA2 . For WPA2 , enter a unique password that others
will need to access your Wi-Fi hotspot.
Note: is recommended by IEEE.
WPA2
Broadcast Channel : If you notice interference after your
hotspot has been active for a while, try different
channels.
characters.
SAVE .
SSID
type, and entering the correct Wireless password
to set up
or
Open
, selecting a
.