Advertisement
This document describes a simple method for characterizing DFWM-GIB00 WLAN module based
RF parameters, such as transmitted spectra and receiver sensitivity. It will be described step by step
below that how to control and setup.
Step 1 : Extract to CDM20814_WHQL_Certified.zip, it is a USB to UART driver, then setup it.
Step 2 : Setup teraterm_utf8-4.58.exe program, this program can help to send command to module.
Step 3 : Double click UTF-8 execute file as shown below, it will occur after completing step2 install.
Step 4 : When implement UTF-8, selecting Serial port correctly.
Step 5 : After entering UTF-8, send command at. If connection is successful, it will reply ok.
User Manual
Proprietary Information and Specifications are Subject to Change
Figure 1
Figure 2
2
Sheet
of 11
DFWM-GIB00
Mar. 27, 2012
Advertisement
