Table of Contents
Advertisement
Product Descriptions
Buttons
Multi-function button
Center Button
These buttons are operational only after your computer is connected
to the NovoPRO device.
Buttons 1/2/3/4
LEDs
1) When the Launcher is plugged into your computer, all LEDs light up momentarily.
2) After the "Novo" software is started, the red LED ring blinks slowly for 3 times
3) When your computer is being projected on the screen,
a. The blue LED ring lights up if you are in full-screen projection, or,
b. The blue LED in the corresponding quadrant lights up if you are in one of the
four quadrants.
3
Single click - enable full-screen projection
Long press - disconnect from the NovoPRO device
Single click - project your computer to the corresponding display quadrant.
Advertisement
Table of Contents
