Connecting Multiple Monitors; Using The Input List - LG 55XS4J-B.AUS Owner's Manual

Connecting Multiple Monitors

To use multiple products, first connect an external device to the product, connect one end of the supported signal input
cable to the connector of the product, and then connect the other end to the
to connect to.
HDMI IN 1
HDMI IN 2
RS-232C
NOTE
• If you set the tile mode using HDMI, you will not be able to watch HDCP-encrypted content.
• If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable.
• DP Cable - Use a DP cable that is certified to DP 1.1a standard or higher.

Using the Input List

(HOME)
• HDMI1 HDMI2
DP IN DP OUT DP IN
DP OUT DP IN
DP OUT DP IN
RS-232C RS-232C
IN OUT
DP OUT DP IN
DP OUT DP IN
DP OUT DP IN
RS-232C RS-232C
IN OUT IN
connector of the product you wish
DP OUT
DP OUT
DP OUT
RS-232C
OUT
25