Huawei U8655N Maintenance Manual page 23

U8655
Maintenance Manual
4. Install the Power key FPC.
6. Remove the protective film from the LCD.
8. Install the PCBA: Insert the USB port into cover A,
and then snap the PCBA downward in place.
Issue 1.0 (2012-02-23)
5. Remove the protective film from the touchscreen
panel.
7. Install the LCD. Ensure that the two latches are
snapped in place and that the LCD is even.
9. Gently press the PCBA to close the latches to secure
the PCBA.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Assembly Procedure
18