Table of Contents
Advertisement
Preparation
Unpack the test
Open the tap and
strip.
let the water flow for
approx. 1 minute.
After detecting the water hardness:
1. After turning on your machine, press and hold the Delayed Start and Start/Pause/Cancel
keys respectively.
2. Using the Delayed Start key, turn on LEDs 9 and 3.
3. Use the function keys to adjust the water hardness level.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
Perform the same hardness level adjustment that you have set on the control panel also with
the regeneration adjustment switch. For example, if you have adjusted to "3" in the control
panel, also set the regeneration adjustment switch to
3 .
Regeneration Adjustment Switch
Dishwasher / User's Manual
Dip in the test strip
into the water for 1
second.
German Water
French* Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
Level 0
1
Take out the strip
Wait for 1 minute.
from the water and
shake it.
Water Hardness Level Indicator
On the 1
level, the 1
programme LED turns on.
st
st
On the 2
level, the 2
programme LED turns on.
nd
nd
On the 3
level, the 3
programme LED turns on.
rd
rd
On the 4
level, the 4
programme LED turns on.
th
th
On the 5
level, the 1
, 2
, 3
th
st
nd
turn on.
Level 1
Level 2
Level 3
1
2
Make the necessary
adjustment
according to the test
strip.
and 4
programme LEDs
rd
th
Level 4
Level 5
3
4
5
13 / 43 EN
Advertisement
Table of Contents
