Removing And Installing The Power Supply - Gigabyte G492-ID0 User Manual

3-10 Removing and Installing the Power Supply

CAUTION!
Please see Section 2-2 "Rear View" for installation sequence.
Follow these instructions to replace the power supply:
1. Flip and then grasp the power supply handle.
2. Press the retaining clip on the top side of the power supply in the direction indicated.
3. Pull out the power supply using the handle.
4. Insert the replacement power supply firmly into the chassis. Connect the AC power cord to the
replacement power supply.
3
2
1
4
- 33 - System Hardware Installation