Page 1
FCC Statement This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
1. Introduction Thanks for the purchasing of your new Gigabit Ethernet PCI adapter. This document describes the Installation of network adapter. This adapter supports 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet copper interface. Moreover, the PCI interface on the Gigabit Ethernet NIC complies with PCI Local Bus, is compatible with 32-bit PCI bus. As a bus master, the NIC requests access to the PCI bus, instead of waiting to be polled.
2. Unpack and Inspect Caution: Under ordinary circumstances, this adapter card will not be affected by static charge as may be received through your body during handling of the unit .In special circumstances where you may carry an extraordinarily high static charge, it had better reduce the charge by touching a ground before handling the adapter card.
5. Software Installation Microsoft Windows 98SE 1. Plug the adapter into the PCI slot. 2. Press the power button on the case of PC to turn it on 3. Windows 98 will prompt "PCI Ethernet Controller" in "Add New Hardware Wizard" dialog box, click <NEXT>...
Microsoft Windows 2000 1. Plug the adapter into the PCI slot. 2. Press the power button on the case of PC to turn it on. 3. Windows 2000 will prompt "Welcome to the Found New Hardware Wizard" in "Found New Hardware Wizard"...
Page 6
Linux kernel 2.2.x. 1. Compiling rtl8169.c "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c rtl8169.c". 2. Move the object code rtl8169.o to the directory "/lib/modules/2.2.14-5.0/net". "cp rtl8169.o /lib/modules/2.2.14-5.0/net" 3. Insert module to kernel. "insmod rtl8169" 4. Check driver status "dmesg" 5. The media can be forced to one of the 5 modes as follows. The link speed and duplex mode can be forced in 5 modes.
Page 7
Novell Netware System (4.X) Update Netware Server to 4.2. (If don't update to 4.2, use the update file "MSM.NLM, ETHERTSM.NLM" in the CD) Run NetWare Server System. When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD INSTALL"...
Page 8
DECLARATION OF CONFORMITY In accordance to EUROPEAN COUNCIL DIRECTIVE 89/336/EEC = European Community Conformity Mark We, Manufacturer/Importer Longshine Technologie (Europe) GmbH An der Strusbek 9 22926 Ahrensburg Germany Declare That The Product LCS-8037TXR2 Gigabit Ethernet PCI Adapter Is In Conformity With:...