Table of Contents
Advertisement
Quick Links
FCC Statement
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning! This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CE-Mark Warning
In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
All Trademarks and trade names are the properties of their respective owners.
Copyright © 2008, All right Reserved.
Advertisement
Table of Contents
Related Manuals for Longshine LCS-8037TXR2
Summary of Contents for Longshine LCS-8037TXR2
- Page 1 FCC Statement This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.
-
Page 2: System Requirements
1. Introduction Thanks for the purchasing of your new Gigabit Ethernet PCI adapter. This document describes the Installation of network adapter. This adapter supports 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet copper interface. Moreover, the PCI interface on the Gigabit Ethernet NIC complies with PCI Local Bus, is compatible with 32-bit PCI bus. As a bus master, the NIC requests access to the PCI bus, instead of waiting to be polled. -
Page 3: Unpack And Inspect
2. Unpack and Inspect Caution: Under ordinary circumstances, this adapter card will not be affected by static charge as may be received through your body during handling of the unit .In special circumstances where you may carry an extraordinarily high static charge, it had better reduce the charge by touching a ground before handling the adapter card. -
Page 4: Software Installation
5. Software Installation Microsoft Windows 98SE 1. Plug the adapter into the PCI slot. 2. Press the power button on the case of PC to turn it on 3. Windows 98 will prompt "PCI Ethernet Controller" in "Add New Hardware Wizard" dialog box, click <NEXT>... -
Page 5: Microsoft Windows 2000
Microsoft Windows 2000 1. Plug the adapter into the PCI slot. 2. Press the power button on the case of PC to turn it on. 3. Windows 2000 will prompt "Welcome to the Found New Hardware Wizard" in "Found New Hardware Wizard"... - Page 6 Linux kernel 2.2.x. 1. Compiling rtl8169.c "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c rtl8169.c". 2. Move the object code rtl8169.o to the directory "/lib/modules/2.2.14-5.0/net". "cp rtl8169.o /lib/modules/2.2.14-5.0/net" 3. Insert module to kernel. "insmod rtl8169" 4. Check driver status "dmesg" 5. The media can be forced to one of the 5 modes as follows. The link speed and duplex mode can be forced in 5 modes.
- Page 7 Novell Netware System (4.X) Update Netware Server to 4.2. (If don't update to 4.2, use the update file "MSM.NLM, ETHERTSM.NLM" in the CD) Run NetWare Server System. When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD INSTALL"...
- Page 8 DECLARATION OF CONFORMITY In accordance to EUROPEAN COUNCIL DIRECTIVE 89/336/EEC = European Community Conformity Mark We, Manufacturer/Importer Longshine Technologie (Europe) GmbH An der Strusbek 9 22926 Ahrensburg Germany Declare That The Product LCS-8037TXR2 Gigabit Ethernet PCI Adapter Is In Conformity With:...