Table of Contents
Advertisement
System
Mode - User
Picture
Input
Color
Auto Source
Audio
Daisy Chian
Gaming
DP Format
OSD
Wide Mode
System
PIP/PBP
Hot Key Assignment
DDC/CI
Save setting to...
Move
Enter
Mode - User
Picture
HDMI Black Level
Color
Quick start mode
Audio
Gaming
OSD
System
Save setting to...
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Input: Select the source from DP In, HDMI 2.0,HDMI(MHL),or miniDP.
5.
Auto Source:The default is "On", can support auto search for signal source in order.
6.
Daisy Chain: Default is extend, can select daisy chain function extend or clone. Clone Mode is not
supported with Adaptive-Sync
7.
DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
8.
Wide mode: You can select which screen aspect you are using. The options are Full, Aspect, and 1:1.
9.
PIP/PBP settings
10.
Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Input, Volume, Gamma,
Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2 (Modes, Brightness, Input, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)
11.
DDC/CI: Allows the monitor settings to be set through the software on the PC.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls
to be sent via software.
12.
HDMI Black level setting
13.
Quick start mode: Select Off or On. Turn on to speed up boot speed.
HDMI[MHL2.1]
On
Clone
DP 1.2
Full
X
Nomal
Off
X
Advertisement
Table of Contents
