Safety ....................................1 National Conventions ..............................1 Power ..................................2 Installation ................................. 3 Cleaning ..................................4 Other ..................................5 Setup ....................................6 Contents in Box ................................. 6 Setup Stand & Base ..............................7 Adjusting Viewing Angle ............................8 Connecting the Monitor ............................. 9 Adaptive function (Available for selective models) ....................
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
DP Cable VGA Cable USB Cable Audio Cable Not all signal cables (HDMI / DP / VGA / USB /Audio cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below: NOTE: Do not touch the LCD screen when you change the angle.
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. HDMI-2 2. HDMI-1 3. DisplayPort 4. Earphone 5. DC in 6. USB-PC upstream 7. USB 3.2 Gen 1 8. USB3.2Gen1+Quick Charging 9. USB 3.2 Gen 1 10. USB 3.2 Gen 1 Connect to PC 1.
Adaptive function (Available for selective models) 1. Adaptive function is working with DP/HDMI 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com • Radeon™ RX Vega series • Radeon™ RX 500 series •...
Adjusting Hotkeys < > Source/Exit Game Mode/< Dial Point/> Menu/Enter Power Source/Exit When the OSD is closed, press “ ” button will be Source hot key function. ” button continuously about 2 seconds to do auto configure (Only for the models When the OSD is closed, press “...
OSD Setting Basic and simple instruction on the control keys. Luminance Color Setup Picture Boost OSD Setup Game Setting Extra Exit Contrast Gamma Gamma 1 Brightness Eco mode Standard HDR Effect Luminance Color Setup Picture Boost OSD Setup Game Setting Extra Exit Contrast...
Color Setup Color Setup Picture Boost OSD Setup Game Setting Extra Exit Luminance Color Temp. Warm DCB Mode Green DCB Demo Blue Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. Color Temp.
Picture Boost Picture Boost OSD Setup Game Setting Extra Exit Luminance Color Setup Bright Frame Brightness H. Position Frame Size Contrast V. Position on or off Bright Frame Disable or Enable Bright Frame Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast...
Break reminder if the user continuously work for more on or off Break Reminder than 1hrs USB Charge on or off USB charge On/Off (CQ27G2U) Note: If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1...
Game Setting Game Setting Extra Exit Luminance Picture Boost OSD Setup Color Setup Adaptive Sync Game Mode Game Color Shadow Control LowBlue Mode Frame Counter Low Input Lag Overdrive Extra Exit Luminance Picture Boost OSD Setup Game Setting Color Setup Game Mode FreeSync Game Color...
Page 20
Note: The function MBR and Overdrive Boost are available only when Adaptive-Sync/FreeSync is off and the vertical frequency is up to 75 Hz.
Extra Game Setting Extra Exit Luminance Picture Boost OSD Setup Color Setup Input Select Auto Image Ratio Wide Resolution : 1920(H)X1080(V) Auto Config. DDC/CI H. Frequency : 67KHz Off Timer Reset V. Frequency : 60Hz Input Select Select Input Signal Source Off timer Select DC off time 0-24hrs...
Exit Luminance Picture Boost OSD Setup Color Setup Game Setting Extra Exit Exit Exit the main OSD LED Indicator Status LED Color Full Power Mode White Active-off Mode Orange...
Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Press to auto adjust. Picture Is Fuzzy & Has Make sure you are not using an extension cable or switch box.
Page 24
The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor’s video cable is properly connected to the computer. Monitor Is Stuck In Active Off- Inspect the monitor’s video cable and make sure no pin is bent. Mode”...
Specification General Specification Model name CQ27G2U Driving system TFT Color LCD Viewable Image Size 68.5cm diagonal Panel Pixel pitch 0.2331mm(H) x 0.2331mm(V) Separate Sync. H/V TTL Display Color 16.7M Colors 30k-230kHz(HDMI) Horizontal scan range 230k-230kHz(DP) Horizontal scan Size(Maximum) 596.736mm Vertical scan range...
Page 26
Model name C27G2ZU Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Panel Pixel pitch 0.3114mm(H) x 0.3114mm(V) Separate Sync. H/V TTL Display Color 16.7M Colors 30k-230kHz(HDMI) Horizontal scan range 230k-230kHz(DP) Horizontal scan Size(Maximum) 597.888mm Vertical scan range 48-240Hz(HDMI, DP) Vertical Scan Size(Maximum) 336.312mm Optimal preset resolution...
Pin Assignments Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name TMDS Data 2+ TMDS Data 0- DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2- TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock- TMDS Data 1Shield...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.