Table of Contents
Advertisement
3.1
OSD Setting Menus
Follow the instructions indicated on the bottom of the OSD Function Menu. Press
on the control panel or
/
CH
CH
through the menus. Press INPUT on the control panel or OK key on the remote
control to select an item and then press MENU key to exit the OSD menu.
The following menus can be set by different adjustment methods.
3.2
Adjusting Picture Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
Press
/
on the remote control or
CH
/ CH
on the control panel to select
Picture menu.
3
Press
/ OK on the remote control or
INPUT on the control panel to enter the
Picture menu.
4
Press
/
on the remote control or CH
an item.
5
Press
/ OK on the remote control or INPUT on the control panel to enter the item.
6
Press
/
on the remote control or
the scales or press OK on the remote control or INPUT on the control panel to mark
an item.
7
Press RETURN to return to the Picture menu.
8
Press MENU to exit the Picture menu.
9
The Picture menu can be used to adjust the Picture mode, Brightness, Contrast,
Sharpness, Color, Tint, Color Temp, Back Light, Digital NR, X-Contrast, Aspect
Ratio, and Recall settings. Brightness, Contrast, Sharpness, Color, Tint, Color
Temp, and Back Light are only available for adjustments if you select User in
Picture Mode. Press
panel to adjust these settings.
• The Picture Mode can be set to Vivid,
• The Color Temp can be set to Warm, Standard, or Cool.
• The Digital NR can be set to Off, Weak,
• The X-Contrast can be set to
• The Aspect Ratio can be set to Full, Normal, Zoom, Subtitle, Auto, Zoom-1.
• The Recall can be used to reset to the factory defaults.
Note:
The items available on the OSD may vary depending on the input signal source.
30
arrow keys on the remote control to scroll
/
Picture
Audio
Channel
V-CHIP
Setup
VOL+
/
/
on the remote control or
Standard
Medium
Off
or On.
Picture Mode
Brightness
Contrast
Sharpness
Color
Tint
Color Temp
Back Light
Digital NR
Next Page
Move
Enter
Return
OK
Return
/ CH
on the control panel to select
VOL-
on the control panel, to change
VOL+
VOL-
/
, Movie, or User.
, or Strong.
Exit
Menu
on the control
Hide quick links:
Advertisement
Table of Contents
