Omni SM-2927 Instruction Manual

Omni Outdoor
Bluetooth Speaker
®
Instruction Manual
SM-2927
4
3

Functions:

1. Rubber cover
2. ON/OFF Switch
3. Micro-USB input port
4. LED Indicator
5. Caribiner
What's included:
1 x Bluetooth® Speaker (SM-2927)
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
1 x Caribiner
• Playing time: up to 1.5 hr at max volume
• Charging time: up to 1.5 hr
• Pairing Name: Omni Outdoor

Instructions:

(Be sure to fully charge the speaker before
using for the first time.

Charging the Speaker

1.
• Connect the provided charging cable to a
power source and to the micro USB port on
the speaker (4).
The LED indicator light will glow red when
charging and turn off when fully charged.
Bluetooth Setup:
2.
®
• Turn ON/OFF switch(2) to ON position, LED
1
indicator(3) will flash BLUE.
• Turn on the Bluetooth function on mobile
device, Select "Omni Outdoor pairing name.
• LED will turn solid BLUE if successfully
paired
* Speaker will automatically pair if the mobile
2
device has been paired before.
• Turn ON/OFF switch(2) to OFF position to
turn off the device.

SAFETY PRECAUTIONS:

• WARNING-When using this product, basic
precautions should always be followed:
1. Read all the instructions before use.
2. Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
3. The unit's full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
4. To reduce the risk of injury, close
supervision is necessary when the product
is used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its
output rating. Overload outputs above
7. Do not use the device if damaged or
8.
explosion or risk of injury.
9. Do not disassemble the device. For
professional. Incorrect reassembly may
10.
"
or temperatures above 104°F may cause
explosion.
11.
use only identical replacement parts to
ensure product safety

FCC Statement:

approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment general uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions (1) this device may not cause
harmful interference, and (2)this device must
accept any interference received, including
interference that may cause undesired
operation.
MADE IN CHINA