Replacement Of Door Assembly - Samsung CM1519A-1 Service Manual

3. Disassembly and Reassembly

3-3 Replacement of Door Assembly

Decoration Door Cover
Door Handle Cover
Parts
NOTE : Be sure to wear gloves when you disassemble or assemble the parts.
Remove hex bolts securing the upper hinge and lower hinge. Then remove the door
1.
assembly.
Insert the at screwdriver or thin metal plate into the gap between the door-E and door-C to
2.
remove Door-C from the door assembly.
Door
Remove 2screws securing the Door-Handle.
Assembly
3.
Unbend the 6 metal tabs around the trim of Decoration Door Cover.
4.
Remove 3 screws securing the Door-E Assy.
5.
Remove upper hinge and lower hinge.
6.
Remove Decoration Door, Screen-B, Key-Door, Spring-Key, Pin-Key as needed.
7.
Remove hex bolts securing the upper hinge and lower hinge.Then remove the door assembly.
1.
Insert the at screwdriver or thin metal plate into the gap between the door-E and door-C to
2.
remove Door-C from the door assembly.
NOTE : Be careful when handling Door-C as is fragile.
Door Handle
NOTE : The thickness of the atscrewdriver or thin metal plate inserted into the gap should be
0.5mm or less.
Remove 2 screws securing the Door Handle to the Door-E Assy.
3.
Unbend the 2 metal tabs at both ends of the Door Handle to remove the Door Handle Cover
4.
from Door handle.
When mounting the door to the oven, be sure to adjust the door parallel to the bottom line of
1.
the oven face plate by moving the upper hinge and lower hinge in the direction necessary for
proper alignment.
Reassembly
Adjust so that the door has no play between the inner door surface and oven front surface.
2.
Test
If the door assembly is not mounted properly, microwave energy may leak from the space
between the door and oven.
Do the microwave leakage test.
3.
Explanation Photo
Upper Hinge
Door E Ass'y
Decoration Door
Screen B
Lower Hinge
Spring-Key
Door Handle
Explaination
8
Door C
2 screws securing
Door Handle
Key-Door
Pin-Key