Automatic Icemaker - GE Monogram ZIF360NHXH Owner's Manual

Automatic
icemaker
parts of the ejector mechanism, or with the heating
element (located on the bottom of the ice maker)
(freezer models)
that releases the cubes. Do not place fingers or
hands on the automatic ice making mechanism
while the refrigerator is plugged in.
pièces mobiles du mécanisme d'éjection ou
l'élément chauffant (situé dans le bas de la machine
à glaçons) qui libère les cubes. Ne placez pas les
doigts ou les mains sur le mécanisme de
production de glace automatique lorsque le
réfrigérateur est branché dans la prise électrique.
A newly-installed refrigerator may take 12–24
hours to begin making ice.
The icemaker will produce seven cubes per
cycle—approximately 15 cycles in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number of door
openings and other use conditions.
If the refrigerator is operated before the water
connection is made to the icemaker, set the
power switch to OFF.
The icemaker is located behind the first drawer
Accessing the
on the right of the freezer. The ice bin is the
icemaker and
second drawer.
ice storage
bin
(freezer models)
CAUTION
Avoid contact with the moving
MISE EN GARDE
Évitez tout contact avec les
Ice bin

Automatic Icemaker

36" All-Refrigerator and All-Freezer Units
Power
Switch
When the refrigerator has been connected to the
water supply, set the power switch to ON.
Throw away the first full bucket of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of the
feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE: Icemaker works best between 40 and 120
PSI home water pressure.
To remove the ice bin:
Open the access door to reach the icemaker. Set
the icemaker power switch to the OFF position.
With the access door closed, support the storage
bin at the bottom while slightly lifting. Pull bin
straight out. See Drawer Removal section.
To replace the ice bin: Slide the bin back until
the tab on the bin locks into the slot on the shelf.
After replacing the ice bin, open the access door
to reach the icemaker. Set the icemaker power
switch to the ON position.
On/Off switch
Icemaker
(freezer models)
Icemaker
Feeler Arm
9