Guess 10179G Booklet page 26

To reset stopwatch hands:
1. PULL Crown to position "C".
2. PRESS Pusher "A" intermittently until the top eye hand is reset to
"0".
3. PRESS Pusher "B" intermittently until the middle and top eye
hands is reset to "60".
NOTE: PRESSING and HOLDING either Pusher "A" or "B" will cause
the hands to continue to move until the pusher is released.
If the stopwatch hands move improperly:
1. PULL out the Crown to "B" position.
2. PRESS Pushers "A" & "B" simultaneously for 3 seconds.
3. RELEASE Pushers, stopwatch hands will move 180 degrees.
4. PUSH Crown in to "A" position.
Standard stopwatch measurement:
1. PRESS Pusher "A" to start timing.
2. PRESS Pusher "A" to stop timing.
3. PRESS Pusher "B" to reset.
Timing 2 competitors:
1. PRESS Pusher "A" to start timing.
2. PRESS Pusher "B" to stop timing.
3. PRESS Pusher "A" to stop timing of second event.
4. PRESS Pusher "B" to view time of second event.
5. PRESS Pusher "B" to reset.
Split time:
1. PRESS Pusher "A" to start timing.
2. PRESS Pusher "B" to stop split.
3. PRESS Pusher "B" to begin again.
4. PRESS Pusher "A" to stop.
5. PRESS Pusher "B" to reset.
26 mens