DWT Leader EBS 800 Instruction For Installation And Maintenance

DWT Leader EBS 800 Instruction For Installation And Maintenance

Advertisement

INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE
EBS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Leader EBS 800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DWT Leader EBS 800

  • Page 1 INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE...
  • Page 3: Table Of Contents

    CONTENTS page SAFETY MEASURES STARTING THE PUMP RECOMMENDATIONS TROBLESHOOTING DISPOSAL GUARANTEE...
  • Page 4: Safety Measures

    SAFETY MEASURES Before starting the pump, read this instruction booklet carefully and keep it in a safe place forfuture reference For safety reasons, the pump must not be used by anyone who has not read these instructions. The pump must not be used by anyone under 16 years of age or by anyone who has not readand understood the present instruction booklet.
  • Page 5: Starting The Pump

    STARTING THE PUMP Given the different provisions applicable to the safety of electric systems in different countries, make sure that the pump system, as concerns its intended use, is in accordance with current legislation. Before starting the pump, make sure that: The voltage and frequency specified on the pump’s nameplate coincide with those of the •...
  • Page 6 Booster with integrated electronics Installation The pump's inlet pressure should not exceed 28 psi. The maximum suction depth should be less than 26 feet The device will not pump liquid if the tap is more than 50 feet above the level ofthe pump. Due to the non-return valve in this model, the suction hose cannot be filled through the filler cap on the pump.
  • Page 7: Recommendations

    RECOMMENDATIONS To ensure the proper operation of the pump, it is important to comply with the following recommendations: The pump should not operate with the delivery tap completely closed (except for electronically controlled pumps). The pump must never be allowed to run dry. •...
  • Page 8: Trobleshooting

    TROUBLESHOOTING Before taking any troubleshooting action, disconnect the pump from the power supply. lf there is any damage to the power cord or pump, any necessary repairs or replacements must be handled by the manufacturer or his authorized customer support service. or by an equally qualified party, In order to prevent all risks.
  • Page 9: Disposal

    DISPOSAL This product or its parts must be disposed of in accordance with the laws regarding the environment; Use the local, public or private, refuse collection services. GUARANTEE Any material or manufacturing defects will be corrected during the guarantee period established by current law in the country where the product is purchased.
  • Page 10 DAB PUMPS INC. 3226 BENCHMARK DRIVE LADSON, SC 29456 USA TEL: 1-843-797-5002 FAX: 1-843-797-3366...

This manual is also suitable for:

Leader ebs 1000Leader ebs 1250Leader ebs 1400

Table of Contents