Table of Contents
Summary of Contents for MANCHESTER WOOD MISSION 7401
- Page 1 MISSION PRINTER CART Thank you for purchasing our Mission Printer Cart. Assembly of this product requires the use of a Phillips screwdriver and hammer. We have found it helpful to have second person assist with assembly. 7401/7441 121108...
- Page 2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non-abrasive surface (like the carton or carpet) to prevent damage to the finish.
- Page 3 STEP 6 Align 2 Side Assembly with Bottom Shelf (C) as shown in STEP 5. STEP 7 Align 2 Shelf Assembly (C) with Side Assemblies (B) as shown. A second persons assistance would be recommended to hold shelving (C) while both sides are screwed into place.
- Page 4 STEP 9 Tap Wooden Plugs into holes with hammer to conceal screws. STEP 10 Push Casters into the bottom of Side Assemblies (B) until you feel them snap into place. Inserts are already placed in base. CARE Dust as needed with a soft cloth. Clean with damp cloth and mild solution of dish soap.
Need help?
Do you have a question about the MISSION 7401 and is the answer not in the manual?
Questions and answers