Table of Contents
Advertisement
10、Common troubleshooting wizard
If you encounter the following problems in use, troubleshooting will help you quickly
solve the problem, if the problem is still not resolved, it is recommended to contact our
service department to help solve.
phenomenon
Can not boot
Touch screen is not allowed
The touch screen does not
respond
Reversing without rear view
image
The system does not start, the
rear view image appears after
the reverse process, and the
button is invalid.
Navigation cannot be located
Reason
The car key is not inserted into
the switch and the switch is not
open
Power line insertion host
Recalibrate the touch screen, press and hold the screen with five
fingers, and the system will automatically enter the calibration
The system is processing the transaction (road search, etc.), wait a
moment, if it still can't be solved, please press the RST hole through
the needle or the tip of the pen.
Camera not installed
Camera system is wrong
Pay attention to the principle of
driving safety when designing
products, and preset the rear
view priority
May be in the shielding area of
some navigation signals
15
Handle
Insert the vehicle key and open
the door
Insert power cord
screen.
Install camera
Restart the machine
You must terminate the reverse
action before you can start the
system by pressing the original
car power button.
Try to drive the car out of a
distance and observe whether
the navigation resumes the
Advertisement
Table of Contents
