Summary of Contents for ARMTEL ARMT.665230.202UM
- Page 1 DIS Digital Desktop Call Station ARMT.665230.202UM User Manual Document version 14 26.30.11.190 2022...
- Page 2 © Armtel info@armtel.com...
-
Page 3: Introduction
Digital desktop call station DIS is the subscriber's equipment of Public address and General alarm system within the digital communication systems DCN and IPN, manufactured by Armtel LLC, Russia, used at industrial and transportation facilities. DIS is installed in control rooms, offices, and premises. -
Page 4: Safety Provisions
It is forbidden to supply power to the DIS simultaneously via the main and "phantom" power supply circuits of the product. The safety provisions relating to the specific operations outlined in this manual are indicated by the following sign: стр. 2/32 armtel.com © Armtel info@armtel.com... -
Page 5: Table Of Contents
2.4 Installation, connection, and dismantling ....................19 2.5 Operation ................................. 21 2.5.1 Switching ON DIS unit ..........................21 2.5.2 Operation modes ............................21 2.5.3 Troubleshooting ............................23 3 MAINTENANCE ................................24 3.1 General guidelines ..............................24 armtel.com стр. 3/32 info@armtel.com © Armtel... - Page 6 3.4.2 Checking the acoustic path ........................25 3.4.3 Checking the operation of direct keys ....................25 4 REPAIR ....................................26 5 STORAGE .................................... 27 6 TRANSPORTATION ................................. 28 7 DISPOSAL ................................... 29 Appendix А (reference) Connection DIS ........................30 стр. 4/32 armtel.com © Armtel info@armtel.com...
-
Page 7: Design And Description
Digital desktop call station DIS is the subscriber's equipment of Public address and General alarm system within the digital communication systems DCN and IPN, manufactured by Armtel LLC, Russia, used at industrial and transportation facilities. DIS is intended for use in metallurgical, chemical, oil refining, gas, and oil production, and other industries, as well as in transport. - Page 8 Features description of DIS application in the systems IPN and DCN, the list of assignable functions and description of the illumination of the direct keys, as well as programming techniques are given in the operational documentation for these systems. стр. 6/32 armtel.com © Armtel info@armtel.com...
-
Page 9: Specifications
Relative air humidity at 25 °С, % up to 80 Overall dimensions with fully turned up microphone, maximum, mm 260×200×416 Weight, max, kg see Table 3 Compliance of the product with safety class 4N according to NP-001-15 is allowed armtel.com стр. 7/32 info@armtel.com © Armtel... -
Page 10: Scope Of Supply
ARMT.665230.207 DIS Expansion unit customer Operational documentation ARMT.665230.202PP Product Passport ARMT.665230.202UM User Manual * Version by the scope of supply. For the parameters of the corresponding design (number of buttons and weight), see Table 3. стр. 8/32 armtel.com © Armtel... -
Page 11: Design
Up to four DIS expansion units ARMT.665230.207 can be connected to the DIS to increase the number of programmable keys if required (see 1.2.4). The external appearance and dimensions of the DIS with 8 keys are illustrated in Figure 2. armtel.com стр. 9/32 info@armtel.com © Armtel... - Page 12 DIS is made in a plastic case, the cover of which is tilted for better visibility of the buttons. The case is equipped with rubber feet protruding from the bottom wall for greater stability. стр. 10/32 armtel.com © Armtel info@armtel.com...
-
Page 13: Marking
commercialization mark for products on the market of Customs Union member states; mark III electrical safety class according to GOST IEC 61140-2012; special waste disposal mark; product serial number; date of manufacture. The serial number is unique for each product. armtel.com стр. 11/32 info@armtel.com © Armtel... -
Page 14: Package
For shipment of the DIS from the manufacturer, consumer package contents are placed in the package place, which ensures protection from mechanical damage, direct ingress of atmospheric precipitation, dust, and solar radiation during transportation. стр. 12/32 armtel.com © Armtel info@armtel.com... -
Page 15: Description And Operation Of Product Components
Figure 3 – Mainboard of DIS The mainboard includes: Х1 – socket for connecting the main microphone "on the gooseneck"; Х3 – socket for connecting a wired headset / remote microphone with a tangent; armtel.com стр. 13/32 info@armtel.com © Armtel... - Page 16 R78 – tuning resistor for adjusting the sensitivity of the main microphone during outgoing simplex communication; R104 – a tuning resistor for adjusting the Handsfree circuit; FU1…FU6 – line of fuses for main and “Phantom” power supply lines. стр. 14/32 armtel.com © Armtel info@armtel.com...
-
Page 17: Led Indication Keys
IDC16 connector is located on the left and right walls of the expansion unit housing to connect the flexible loop to DIS or another DIS expansion unit. The dimensions of the expansion unit are given in the operating documentation for the DIS unit. armtel.com стр. 15/32 info@armtel.com © Armtel... -
Page 18: Build-In Microphone With Indicator
Selection of the headset type is made using the DIP switch SW5 on the main board of the DIS. The pin assignment of the connector for connecting the specified additional equipment must comply with the information given in Table A.2 (Appendix A). стр. 16/32 armtel.com © Armtel info@armtel.com... -
Page 19: Output For Connecting An External Amplifier
DCN-16U sub-switchboard of the DCN system or IPN-8U switch module of the IPN system. To do this, it is necessary to switch on the phantom power supply to the Uk interface line by the instruction manuals for the relevant products. armtel.com стр. 17/32 info@armtel.com © Armtel... -
Page 20: Intended Use
Preparation of DIS for use is carried out by representatives of the manufacturer, or by personnel who have been trained (instructed) in the operation of products of Armtel LLC. The main preparation of the product for use is carried out during installation and connection. -
Page 21: Safety Precautions
DIS unit (see Figure 2, item 8). To give the structure additional rigidity, connect the call station and the extension unit with a metal bracket from the DIS unit scope of supply. armtel.com стр. 19/32 info@armtel.com © Armtel... - Page 22 1. Disconnect a suitable power and/or communication cable from the RJ-45 socket. 2. Disconnect the expansion unit bracket (if used). 3. Disconnect the connection cable to the expansion unit (if used). 4. Pack DIS and accessories in individual containers (factory packaging). стр. 20/32 armtel.com © Armtel info@armtel.com...
-
Page 23: Operation
“clear” key on the DIS unit is pressed or the handset is dropped on the telephone. During the connection, the DIS unit subscriber controls the direction of voice transmission by pressing the key to transfer voice armtel.com стр. 21/32 info@armtel.com © Armtel... - Page 24 In detail, communication modes and DIS configuration parameters are described in the documents "DCN communication system. Operation Manual. Part 2. Administrator's Manual" RMLT.465275.002, including the Administrator's Manual to IPN system. стр. 22/32 armtel.com © Armtel info@armtel.com...
-
Page 25: Troubleshooting
The key module is not Check the connection of the key One of the key modules connected to the connector on module to connectors Х6-Х9 does not work the mainboard (see Figure 3) armtel.com стр. 23/32 info@armtel.com © Armtel... -
Page 26: Maintenance
Carry out diagnostics of the DIS performance according to 3.4. The approximate maintenance time is 0,5 hours. All actions carried out on the product, defects found and negative findings of the maintenance shall be recorded in the special logbooks. стр. 24/32 armtel.com © Armtel info@armtel.com... -
Page 27: Checking The Functionality Of The Product
If necessary, it is allowed to change the configuration of the DIS using the software of the workplace of the administrator of the DCN, IPN system. armtel.com стр. 25/32 info@armtel.com © Armtel... -
Page 28: Repair
No scheduled repair work is provided for DIS. Unscheduled repair shall be performed by the manufacturer at the request of the User. The place, time, procedure, and cost of the work shall be agreed upon with the manufacturer in advance. стр. 26/32 armtel.com © Armtel info@armtel.com... -
Page 29: Storage
+ 5 °C to + 40 °C. There should not be any aggressive impurities in the air of the product storage room (vapors of acids, alkalis). armtel.com стр. 27/32 info@armtel.com © Armtel... -
Page 30: Transportation
absence of direct ingress of atmospheric precipitation, water splashes, solar UV radiation, dust, sand, aerosols; the shipping container on the shipping vehicle is fastened to avoid falling and collision. стр. 28/32 armtel.com © Armtel info@armtel.com... -
Page 31: Disposal
The product is not to be disposed of together with household waste and should be delivered to a specialized center for the disposal of electronic products. The operating organization must take full responsibility for the product disposal. armtel.com стр. 29/32 info@armtel.com © Armtel... -
Page 32: Appendix А (Reference) Connection Dis
SPK+ Speaker input + MIC Microphone output MIC+ Microphone input + 1 ...4 connecting a Not used Socket RJ-11 microphone 4P4C with a tangent TANG Tangent connection MIC Microphone output стр. 30/32 armtel.com © Armtel info@armtel.com... - Page 33 DIS DIGITAL DESKTOP CALL STATION User Manual The connection diagram for DIS UNIT is illustrated in Figure A.1. Figure А.1 – DIS connection diagram armtel.com стр. 31/32 info@armtel.com © Armtel...
- Page 34 DIS DIGITAL DESKTOP CALL STATION User Manual FOR NOTES стр. 32/32 armtel.com © Armtel info@armtel.com...
- Page 35 © Armtel...
- Page 36 ARMTEL LLC Tel./fax: +7 (812) 703-41-11 www.armtel.com | info@armtel.com Legal and physical address: Russia, 192012, Saint Petersburg, Zaporozhskaya str., 12 building 1, office 1/2 TECHNICAL SUPPORT 8-800-500-90-17 (for calls from Russian Federation) +7-812-633-04-02 (for international calls) support@armtel.com MORE INFORMATION ABOUT PRODUCT ON OFFICIAL SITE...
Need help?
Do you have a question about the ARMT.665230.202UM and is the answer not in the manual?
Questions and answers