Download Print this page

Habitat Akira 803422 Manual page 2

Low table
Hide thumbs Also See for Akira 803422:

Advertisement

EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking
hazard.
Materials
Mod. A: Oak veneered particleboard, clear matt lacquer (Quercus
robur, origin: Croatia).
Mod. B: Walnut veneered particleboard, clear matt lacquer
(Juglans nigra, origin: Croatia).
Tempered glass.
Assembly instructions
Before beginning assembly, identify all components using the
manual.
Store container during assembly and check that all items listed in
this leaflet are present.
Assemble on a clean, flat surface.
Check proper assembly before each use.
Plan to assemble the furniture as near as possible to where it will
be installed.
Do not use a power screwdriver as it may damage the panels.
Once mounted, this is not removable.
Over time, the fasteners may lose their effectiveness. Regularly
check the screws. If necessary tighten. Remove the glass parts
carefully on a clean, soft surface free of defects that can scratch or
break.
Tempered glass has the distinction of breaking into small pieces
safely.
Recommendations for use
This product is designed for indoor use only.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Do not overload the shelves.
Do not stand on the product.
Do not seat on the product.
Maintenance
This product consists of parts) plated). In order not to damage the
surface, it is recommended not to file a hot object or wet directly.
Do not use magazines or newspapers as a mat. The ink used may
leave traces that can stain permanently the furniture surface.
To avoid the appearance of marks, not to leave any stationary
object for more than two months.
Avoid placing it close to furniture a radiator or air conditioner. The
heat and humidity can cause cracks or deformation.
Spills should be removed immediately with a cloth. then wipe the
surface with a clean dry cloth.
The use of special products for furniture is not necessary or
recommended.
Clean veneer with a damp cloth. Then wipe with a dry cloth.
Do not use abrasives.
Do not hit the tempered glass parts with a hard or sharp object.
To clean the glass parts, use a damp cloth and, if necessary,
dishwashing liquid or mild soap.
Do not use washing powder or other substance containing abra-
sives that can scratch the glass.
Keep the label with lot number, it may be useful in case of
complain.
Akira – 04/2022
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-
design.com or write to this address: HABITAT, 70 AVENUE
VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving the envi-
ronment. This manual can still be found on www.habitat-
design.com.
1

Advertisement

loading

This manual is also suitable for:

Akira 902756Akira 808071