Download Print this page

Iceking RZ283I.E Installation And Operating Manual page 27

No frost freezer in inox

Advertisement

Troubleshooting
Caution! Before troubleshooting, disconnect the power supply. Only
a qualified electrician or competent person must carry out
troubleshooting that is not in this manual.
Problem
Mains plug is not plugged in or
is loose.
The appliance
Fuse has blown or is defective.
is
not working
Socket is defective.
The appliance
The temperature is set too cold
freezes
or the appliance is running on
too much
the SUPER setting.
Temperature is not properly
adjusted.
Door was open for an extended Open the door only as long as is
period.
The food is not
frozen enough A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Heavy build up
of frost on the Door seal is not airtight.
door seal
25
Daily Use
Possible Causes
Solution
Insert mains plug.
Check fuse and replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
Set temperature warmer.
Please look in the initial
Temperature Setting section.
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the Installation
section.
Carefully warm the leaking
sections of the door seal with a
hair dryer (on a cool setting).
At the same time, shape the
warmed door seal by hand such
that it sits correctly.

Advertisement

loading