Page 1
RODRUM S DE Bedienungsanleitung PL Instrukcja obslugi EN Instructions for use CZ Návod k používání FR Instruction d’utilisation TR Kullanim kilavuzu ES Instrucciones de uso HU Kezelési útmutató IT Istruzioni d’uso SL Navodilo za uporabo NL Gebruiksaanwijzing SK Návod na obsluhu PT Instruções de serviço BG Инструкция за експлоатация...
Page 2
Overview RODRUM S basic without spiral type EU no.: 1200001382, type UK no.: 1200001383 type US no.: 1200001384, type CH no.: 1200001385 type AUS no.: 1200001386 Operating...
Contents Page Safety Notes ........................12 General safety instructions ....................12 Special safety instructions ....................13 Residual risks ........................13 Intended use ........................14 Technical Data ........................14 Scope of delivery ........................ 14 Power connection ....................... 15 Putting the PRCD switch into operation ................15 Function of the Unit ......................
Safety Notes General safety instructions ATTENTION! When using electric tools, the following fundamental safety measures must be taken to prevent electric shock, injury or fire. Read all of these instructions before you use the electric tool, and store the safety in- structions properly.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved and appropriately marked. 19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric tool when you are distracted. 20 Check the electric tool for damage.
Identify additional safety measures to protect the operator from the effects of vibra- tion such as: maintain the tool and the accessories, keep the hands warm, organisa- tion of work patterns. Scope of delivery - Pipe cleaning machine.RODRUM S - Guide tube - Operating manual - tool case (only for RODRUM S13)
Power connection Connect only to the single-phase alternating current indicated on the rating plate. Connect only to sockets with protective contacts. The machine must be operated only through a ground fault circuit with max. 30 mA rated leakage current. Connection: Insert the device into an electrical socket and press the green “RESET” button. Once the red function display has lit up, the device is ready to operate.
Ensure that the motor switch is set to “OFF“! Coupling/decoupling the tools / spirals Coupling: Push the tool / spiral until it engages with the coupling. Decoupling: Push the segregation key into the bore and push the tool / spiral to the side out of the cou- pling.
The spiral should never be fully moved back out of the drum! Shut-down Switch off the machine through actuation of the motor switch and pull out the mains power plug. Remove the guide tube from the device. To empty water out of the spiral drum, remove the drum from the machine (p. 6.8) and re- move the dewatering stop plug (7).
Customer service The ROTHENBERGER service locations are available to help you (see listing in catalog or on- line) and replacement parts and service are also available through these same service locations. Order your accessories and spare parts from your specialist retailer or using RoService+ online: Phone: + 49 (0) 61 95 / 800 –...
Need help?
Do you have a question about the RODRUM S and is the answer not in the manual?
Questions and answers