Getting Started with C5
2 Getting Started with C5
2.1 About the Receiver
The new C5 GNSS receiver offers integrated IMU-RTK technology to provide a robust and
accurate GNSS positioning in any circumstances. Unlike the standard MEMS based GNSS
receivers, the C5 GNSS IMU-RTK combines state-of-the-art GNSS RTK engine, calibration-free
professional IMU sensor, 4D-3S initialization and advanced GNSS tracking capabilities. Survey
projects are achieved with high productivity and reliability pushing the boundaries of
conventional GNSS RTK survey.
The receiver can be used as the part of an RTK GNSS system with EFIX eField software.
Moreover, user can download the GNSS data that recorded in the internal memory of receiver
to a computer.
To configure the receiver for performing a wide variety of functions, you can use the web
interface by connecting the receiver with PC or smartphone through Wi-Fi.
2.2 Parts of the Receiver
The operating controls are all located on the front panel. Serial ports and connectors are
located on the bottom of the unit.
2.2.1 Front Panel
The following figure shows a front view of the receiver.
Front Panel
EFIX C5 GNSS USER GUIDE
| 2022-03
P a g e | 8
Need help?
Do you have a question about the C5 GNSS and is the answer not in the manual?