Advertisement
Your Mistral Fan Heater
Congratulations on the purchase of your new
Mistral Low Profile Fan Heater.
Before first using your Mistral Fan Heater, it is
most important that you read and follow the
instructions in this use and care booklet, even if
you feel your are quite familiar with this type of
appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a
place and keep this booklet handy for future
reference.
Your Mistral Low Profile Fan Heater is safe and
easy to use. It has been designed to function
quietly and safely under normal circumstances.
This quality Mistral Fan Heater is fully portable,
with a sturdy metal body and contemporary
design. The Heater features an easy to set
thermostat control, two heat settings as well as a
cooling fan option.
Assembly and Operation
Operation
Remove your heater from its carton and
unwind the power cord to its full length.
Place the heater on a level surface in a
stable upright position. Make certain its 4
position dial is in the 0 "OFF" position.
Plug the cord into a socket outlet.
For heat, turn the control dial to 1 for half
power, 2 for full power or
fan only. The red power indicator light will
illuminate whenever the heater or fan are
selected.
Setting 1, half power, is best suited to
smaller, well-insulated areas that require
less warming to maintain temperature.
Setting 2, full power, delivers rapid warming
air to quickly increase the temperature in a
given area.
for lower power
Off
Heating
2000 Watt
Thermostat
An adjustable thermostatic controller has
been built into this heater allowing you to
choose how warm you wish a particular area
to be. When your selected preset
temperature is reached the heater coils and
fan will switch off. As the area begins to cool
the thermostat reconnects power
automatically.
Adjust the thermostat between MAX (where
the line is the thickest) and MIN (
required room temperature is reached.
Minimum
Level
Fan (without heating)
Heating
1000 Watt
) until
Maximum
Level
Advertisement
